Crack geo5.rar. Smadav pro 9.2 plus keygen 2013.rar adobe after effects cs5 crack windows 7 vdj 7.0.5 full crack mystery case files escape from ravenhearst free download. Download Geo 5 Full Crack 12. Ramesh Sippy Rohit Shetty Film Full Movie Free Download Torrent.
The link was sent to your email.
We were unable send the link to your email. Please check your email.
A new edition of GEO5 is released once a year, always on November 1st. Users of the newest edition always have access to all new upgrades and updates of that edition. The edition is maintained for 2-3 years after release, even after a newer edition is introduced. Fine Maintenance subscribers always have access to new editions. Other users have the opportunity to buy the newest edition as a Single Upgrade.
-
10 May 2019
GEO5 2019 Spring Update
Stratigraphy - Logs module
- Up to 2 layers of casing and annular fills for wells
- Special patterns for annular fill materials (Bentonite, Compactonit, Sand pack and others)
- Special sample types for wells
- Definition of various well head types
- New templates for all field tests
Stratigraphy - Cross Sections module
- Creating cross sections without a need for any other CAD program
- User input of interfaces and faults
- Definition of different ground water levels
- Definition of various graphical and text information (construction site border, roads etc.)
Get more information about GEO5 Stratigraphy.
GEO5 - program news
- Reinforcement definition in sections (Pile, Sheeting Design, Sheeting Check, Anti-Slide Pile)
- Optimization of a circular slip surface according to the mesh grid (Slope Stability)
- New type of a backfill (limited earth pressure due to rock behind the wall) (Walls programs)
- Export DOCX (all programs)
- New anchors production set - ARCO (Sheeting Check)
- New theories for bearing a capacity analysis (Meyerhof, Vesic) (Spread Footing)
- Steel-concrete cross-sections (Sheeting Check, Sheeting Design, Anti-Slide Pile)
- Horizontal bearing capacity (Spread Footing CPT)
Try updated GEO5 demo version
Simply try our demo version for free without any analysis limitations.
Video Tutorials and Training Materials
We have also updated tutorials and documentation to provide smooth program workflow guides and examples.
Update your software
Fine Maintenance subscribers and GEO5 2019 users can download and install the new Edition for free. Other customers can calculate the price of their Single Upgrade in our Shop - just sign into your account or contact us.
-
10 May 2019
GEO5 2019 Spring Update - Tutorials and Documentation
We introduce new video tutorials and materials in the GEO5 2019 Spring Update.
New video tutorials
Watch the video, how to create geological reports using the Logs module in GEO5 Stratigraphy program.
Watch the video, how to create geological cross sections without a need for any other CAD program using the Cross Sections module in GEO5 Stratigraphy program.
We support BIM and sharing information. Watch the video,how to export into BIM - IFC format.
Updated materials and help
Try GEO5 demo version
Simply try our demo version for free, without any analysis limitations.
Update your software
Fine Maintenance subscribers and GEO5 2019 users can download and install the new Update for free. Other customers can calculate the price of their Single Upgrade in our Shop - just sign into your account or calculate the price as a New Customer.
-
15 Nov 2018
GEO5 2019 - New Stratigraphy modules and BIM Support
GEO5 2019 has many additions and improvements:
- Input of GPS coordinates with a direct connection to Google Maps
- Export to both IFC and LandXMLBIM formats
- Improvements in the Stratigraphy program:
- Import of field test formats including AGS, TXT, UNI, CPT, GEF… and more
- Implementation of specialised geological faults, erosion and landslide models
- Terrain edge definitions
- Optimization supporting very large models
- Faster and improved geological model generation
- For bearing capacity calculations both thePile CPT and Spread Footing CPT programs can be run from any retaining wall program
- Calculation of both bearing capacity and settlement from pressuremeter tests (PMTs) in the Spread Footing CPT program
- Strip reinforcement in the MSE Wall program
- Definition of horizontal strip and trapezoidal loads for sheeting and retaining wall programs
- And many other additions and improvements...
New GEO5 Stratigraphy modules:
- Professional site investigation reports including boreholes, CPT, SPT and DMT data
- Comprehensive database of pre-defined templates
- Ability to create user-defined templates and data reports
- Wide range of pattern and color shades now available
- Output of scaled drawings
- Independent of CAD programs
- Generation of straight and/or polylinecross sections
- Visualization of field tests with soil profiles and users descriptions
- Independent vertical and horizontal drawings scales
- Drawing include both legend and chainage
- Export to DXF and DWG formats
- Construction drawings of generated sections have to be done in CAD programs
GEO5 Training materials
We also present a new training materials, as well as updated materials for GEO5 2019:
Engineering Manuals
- Creation of user template (chapter 40)
- Field test interpretation and creation of a geological model (chapter 38)
- Creation and modification of a geological model (chapter 39)
Online Help
- Revised online help for all programs in 2019 Edition
Demo version
Simply try our Demo version for free without any analysis limitations.
Update your software
Fine Maintenance subscribers can download and install the new Edition for free. Other customers can calculate the price of their Single Upgrade in our Shop – just sign into your account or contact us.
Simplified Pricelist, Cost-optimized Packages
We have altered our pricelist such that both cost of individual programs and packages are easy to follow. We have also introduced six program packages with very attractive maintenance and leasing plans. Check out our new Pricing.
-
15 Nov 2018
GEO5 2019 - Cost-effective Maintenance and Program Packages, New Geology package
Simplified Pricelist, Cost-optimized Packages
We have altered our pricelist such that both cost of individual programs and packages are easy to follow. We have also introduced six program packages with very attractive maintenance and leasing plans. Check out our new Pricing.
Geology Package
The Geology Package consists of the Stratigraphy and the Logs and Cross Sections modules. The package is specifically tailored to both site investigation data reporting and geological model generation. The resulting data can be given to geotechnical designers for further subsoil modelling work and it can also be used asinput data in other GEO5 programs.
Cost-effective Maintenance and Program Packages
Your satisfaction with all our products is extremely important to us. Our intention is that our customers always use the current version of our software. For this reason, we have made out maintenance plans more cost-effective and beneficial to you; i.e. when a new program is added to a package, maintained customers get that program for free. Check out our new Price-list.
Require Software for a Single Project?
Do you need our software for a once off specific project? Then take advantage of one of our lease plans. If you like the software, you can convert it to a perpetual license at a very favourable price. Check out our New Pricing.
-
07 May 2018
GEO5 2018 - Spring update
Spring update brings a number of improvements in our programs:
- Counterfort and buttress walls (Cantilever Wall)
- Settlement analysis behind the wall (Sheeting Check)
- Influence of earthquake effect (Spread Footing)
- Possibility to input of terrain by coordinates X, Z (Rock Stability)
- Calculation of overhangs for planar and polygonal slip surfaces (Rock Stability)
- New shapes of the walls, modeling of front wall jump (Gravity Wall)
- New help system (All programs)
- Philippines - DPWH settings (All programs)
- Analysis of vertical bearing capacity according to the Philippine standard (DPWH, annex G) (Spread Footing)
- New anchors DIWY DRILL HOLLOW BARS (Sheeting Check)
- Improved dimensioning of reinforcement (Cantilever Wall)
- Manual input of coefficients p and r for calculation of foundation on bedrock (Spread Footing)
Stratigraphy improvements:
- Significant acceleration of 3D rendering
- Coordinate systems
- Surface countour lines
- Orthophotomap on the terrain
Site Investigation module release is postponed to November 2018, as we want to support all requested functions in the required quality.
As our apologize Stratigraphy users will receive 2019 version for free.Fine Maintenance subscribers and GEO5 2018 users can download and install the Spring Update for free. Other users can calculate the price of the Single Upgrade in our Shop - just log into your account.
-
03 Nov 2017
GEO5 2018 Released
The new Edition brings two new programs Stratigraphy and Spread Footing CPT. It also features number of major improvements.
Take a look at a short intro to the new program Stratigraphy for assessment of results from site investigation. Try our Demo version for free.
What is new?
Stratigraphy
- New program for generation of geological models from boreholes and field tests and for data reporting
Spread Footing CPT
- New program for spread footing design based on data from field tests (CPT, SPT)
All programs
- Possibility to view changes during input and editing of an element
- NBR 6118-2014 (Brazilian standard for concrete structures)
- Possibility to change the font size in the output documents
Spread Footing
- Design of spread footing from plain concrete
Sheeting Check
- Anchors according to Chinese standards (prestressed bar, non-prestressed bar, strand)
- Posibility to define different geology for deadman's anchor element
Sheeting Check and Design
- Posibility to design wall from 2xU steel profiles
- New 'HP' steel profiles
- New 'Z' steel profiles for sheet piles
Nailed Slope
- Posibility to enter the steel mesh in one or two layers
Anti-slide Pile
- Viewing of the deformation of the anti-slide pile at the slip surface level
We also present a new training materials, as well as updated materials for GEO5 2018.
- Creation and modification of a geological model (chapter 38, 39)
- Verification of a Micropile Foundation (chapter 36)
- Embankment – time evolution of settlement (consolidation) (chapter 37)
- Revised online help for all programs in 2018 Edition
Update your software
Fine Maintenance subscribers can download and install the new Edition for free. Other customers can calculate the price of their Single Upgrade in our Shop – just sign into your account or contact us.
10% discount for software purchase
Fine Maintenance subscribers can enjoy 10% discount for new programs or additional licenses of already purchased programs.
-
05 May 2017
GEO5 2017 - Spring Update
Spring update brings the new Software key option (Node-lock) and also a number of improvements and new features in our programs:
- Considering nails (Slope Stability)
- Increased active pressure acting on a wall (according to EAB and SIA 260, SIA 267)
- British format (AGS) for geotechnical data transfer (Pile CPT)
- Calculation of structure in seismic situation according to NCMA-SRW
- Swiss standards (SIA 260 a SIA 267) in all wall programs
- Canadian standard for concrete structures (CSA A23.3-14)
- Considering root of anchors (Slope Stability)
- Input of skin friction as soil parameter (Nailed Slope, Slope Stability)
- Reduction of dimensioning moments and shear forces under supports (Slab)
- New type of cantilever wall (according to SIA 260 a SIA 267)
- Trapeziodal stress in the footing bottom in the calculation of bearing capacity of the walls
- Inputting a welded steel profile (I - cross-sections) (Sheeting Check, Sheeting Design)
- Calculation of MSE walls with Redi-Rock Positive Connection (PC) blocks and Mirafi geogrids
- New types of Vinyl Sheet Piles introduced - Agastyl, Poland (Sheeting Check, Sheeting Design)
- Steel crossections according to Indian Standard IS 808 : 1989 (Sheeting Check, Sheeting Design)
- and much more…
We would also like to introduce our new software package GEO5 Redi-Rock Wall for a complete design of prefabricated retaining walls using the system by Redi-Rock Inc. (USA).
Try the Demo version for yourself.
Fine Maintenance subscribers and GEO5 2017 users can download and install the Spring update for free. Other users can calculate the price of a Single Upgrade in our Shop – all you need to do is log in to your account.
-
31 Oct 2016
GEO5 2017
GEO5 features many changes and improvements:
All programs
- High resolution support
- New GeoClipboard options
- New features of output protocol viewer
Sheeting Check
- Bearing capacity of anchors (strand, bar and helical anchors, deadman)
- Analysis of non prestressed anchors and soil nails
Sheeting Design
- Cross-section verification (sheet pile wall, pile wall, diaphragm wall)
- Increased active pressure and Pressure at rest
- Redistribution of pressures - EAB, LRFD
- Export to the Slope Stability and Sheeting Check programs
Sheeting Design, Sheeting Check
- Timber poles wall support
- Vinyl Sheet Piles, Thyssen Sheet Piles
FEM
- Earthquake analysis
- Slope stability analysis according to EN 1997 DA3
- Free refinement of mesh
- More options for advanced input
- Support of large data projects
Pile Group
- Analysis of group of micropiles
- Verification of bearing capacity in Piles and Micropile programs
Pile
- Verification of steel cross section
- Verification of timber cross section
- Square driven pile
Micropile
- New input of materials
- New cross section drawing
Pile, Micropile
- Geometry and materials improved
Terrain
- General shape of construction site
Simply try our Demo version for free.
Furthermore, we present new training materials, as well as updated materials for GEO5 2017.
- Stabilizing a slope using anti-slide piles (chapter.19)
- Importing data in txt format (chapter. 27)
- Design of a non-anchored retaining wall (revised – chapter 4)
- Design of anchored retaining wall (revised – chapter 5)
- Design of anchored sheet pile wall using Sheeting Check program
- Design of non anchored sheet pile wall using Sheeting Design program
- Pile design based on the results provided by CPT
- Revised online help for all programs in 2017 Edition
Update your software
Fine Maintenance subscribers can download and install the new Edition for free. Other customers can calculate the price of their Single Upgrade in our Shop – just sign into your account or contact us.
10% discount for software purchase
Fine Maintenance subscribers can also enjoy the new 10% discount for new programs or additional licenses of already purchased programs.
-
03 May 2016
GEO5 2016 - Spring Update
Spring update of GEO5 2016 comes with number of interesting improvements and changes:
- New output protocol viewer
- User defined drawing settings for desktop and prints
- Automatic notification of new program versions
- Inclined backfill behind the walls
- Horizontal surcharge behind the structure
- Possibility to define terrain below the top of the wall
- Verification of crack width in rectangular RC section (Sheeting check)
- Reinforcing of concrete cover by mesh, database of meshes (Nailed slope)
- New database and types of pile sheeting (Mer Lion Metals)
- New database of geogrids in MSE wall (Miragrid)
- Chinese classification of soils
- GEF file format for importing of CPTs
- Norwegian standard NS-EN - NA 1992, NA 1997
- Chinese standards for determination of earthquake effects
- FEM - Deformation modulus of soil linearly increasing with depth
- FEM – Simple input of elastic regions where no evolution of plastic strains should occur
- FEM – Simple input of regions with no phi,c reduction during stability analysis
Furthermore, we present new training materials, as well as updated materials for GEO5 2016.
- Rock Stability (chapter 28, 29, 31)
- FEM - Water Flow (chapter 32, 33)
- Input of geometry using DXF file (chapter 30)
- FEM - Simple input of elastic regions (chapter 34, 35)
- Spread Footing
- Gravity Wall
- Slope Stability
- Updated video tutorials for GEO5 2016 edition (English only).
- New controls and design of the online help
All training materials can be downloaded for free on our website.
Try our new Demo version.
Update your software
Fine Maintenance subscribers and GEO5 2016 users can download and install the Spring Update for free. Other users can calculate the price of the Single Upgrade in our Shop – just log into your account.
-
01 Nov 2015
GEO5 2016
GEO5 features many changes and improvements. Take a look at a short intro to the new edition or simply try our Demo version.
New program Anti-Slide Pile
The Anti-Slide Pile program is used for design of pile walls stabilizing slope movement or increasing safety factor of the slope. The first analysis should be done in the Slope Stability program, where the active and passive forces acting on pile wall are computed. Next, the load and slip surface position are transferred to the Anti-Slide Pile program, where other analyses are performed (determination of internal forces on pile, pile deformation and dimensioning of pile reinforcement).
New features brought by GEO5 2016
Program Controls and Appearance
Comes out from modern trends, where we try to select the best, and leave proven procedures. Controlling the programs is now much easier. New feature is the use of the right mouse button and selection of elements using common standards. We are preparing for touch controls and high resolution displays.
3D Visualization and Settings
We have implemented the option to select between 2D and 3D visualization of the structure in selected programs and input modes. The method of visualization settings were completely re-organized, which enables easier and more precise work with the structure visualizing, and many other options. We have also unified the visualization settings with the settings of picture visualization.
Improvements in the FEM program
The FEM program features several minor, but important new features, that make the work significantly easier and make the construction modelling more precise.
• Input of variable deformation modulus by depth
• Determination of areas where no plasticity can occur (overrule of plasticity conditions)
• Determination of region, where the values of fi,c are reduced when calculating slope stability
• New mesh generatorGeotechnical Improvements
• Automatic determination of the coefficient of pressure reduction
for soldier beams
• Verification of user defined steel cross-section
• New types of pile sheeting
• Rectangular piles (Sheeting Check)Field Tests Support
The new edition supports several new analysis methods using field tests.
CPT - Automatic classification of soil behavior type
by Robertson 1986, 2010 (Pile CPT)
DMT - Analysis of settlement of shallow foundations (Spread Footing), calculation of subgrade reaction modulus (Sheeting Check)
PMT - Calculation of subgrade reaction modulus (Sheeting Check)Standards Support
• Dutch National Annex NEN-EN 1997-1/NB
• Belgian National Annex NBN EN 1997-1 ANB
• French Standard NF P 94-282 (excavation design)
• Soil classification according to Chinese standards
• Spring method by JJ 120-2012 (China)Fine Maintenance subscribers can download and install the new Edition for free. Other customers can calculate the price of their Single Upgrade in our Shop – just sign into your account or contact us.
-
01 Nov 2015
GEO5 2016 - New System of Releases
Fine Software changes the method of new releases, as of November 1st 2015.
The reason for the revision is to provide better services to our customers and mainly faster availability of new program features.
Two new terms are introduced
Edition - is released once a year on November 1st, and is labeled with the release year behind the software name (GEO5 2016). Each edition must be purchased separately (upgrade costs 20%). Fine Maintenance users get the upgrade free of charge.
Version - Each edition can have arbitrary number of versions, which are released during the year. New versions contain fixes, improvements and new program features. All versions are for free to all edition users.
-
10 Nov 2014
GEO5 version 19
NEW APPLICATIONS
- Shaft – new program for vertical circular shaft design
- FEM - Consolidation – new module for time dependent settlement analysis
NEW FEATURES
- Pile Group - general shape of pile cap and general coordinates of piles, inclination of piles
- Gravity Wall - general shape of wall
- Gravity Wall - verification of masonry structures (EC, GB)
- Wall programs - interfacing with Piles, Pile Group
- Import of table data from text and spreadsheet files (TXT, CSV, XLSX, ODS)
- GeoClipboard - copy of geotechnical data using clipboard
- DXF import to GeoClipboard
- User definition of default Settings for a new task
- Rock Stability - new input of water, new types of analysis of polygonal slip surface
- Rock Stability - overhangs in 3D rock wedge
- MSE Wall – internal stability for walls with benches
- MSE Wall - new generation of data for Slope Stability
- MSE Wall - new types of geo-reinforcement in database
- MSE Wall - input of graphical of slip surface
- Sheeting Check - automatic iteration of modulus of subgrade reaction Kh
- Settlement - displaying of degree of consolidation in graph
- Sheeting Check - Normal force for verification of steel structures
- Gabion, Prefab Wall – with possibility to consider minimum dimensioning pressure
- Sheeting Check, FEM - US names of rolled steel profiles
- Slope Stability, MSE Wall - new restrictions on optimization for circular slip surface
LOCALIZATIONS
- German version – software and output reports
- Italian version – software and output reports
STANDARDS
- NAD Singapore
- NAD Denmark
- DK NA: 2013 - Spread Footing - analysis of bearing capacity
- Gravity Wall – masonry structures according to EN 1996-1-1 (EC 6)
- Gravity Wall – masonry structures according to GB50003-2011 (China)
- Sheeting Check - verification of steel according to GB50017-2003 (China)
DOCUMENTATION
- User Guide - Chinese and Russian localization
- Engineering manuals (Part 1) - Bulgarian and Chinese version
- Engineering manuals (Parts 2 and 3) - Spanish version
-
30 Apr 2014
GEO5 version 18
New features in version 18
- Sheeting Check – design of reinforced concrete & steel cross-sections
- Piles – horizontal bearing capacity according to Broms
- Walls – new types of foundation below the walls (strip footing, piles)
- Slope Stability – earthquake analysis according to Chinese standards
- Slope Stability – selection of used methods in Settings
- Walls – earthquake analysis according to Chinese standards
- Spread Footing – new footing eccentricity verification
- Sheeting Check – new catalogues of sheet piles (Larsen Knyssen, Arcelor Mittal)
- Sheeting Check – plotting of sheet piles cross-sections
- Walls, Spread Footing – user defined input of allowable eccentricity of load
- Walls, Spread Footing – user defined determination of critical cross-sections of steel-reinforced concrete structures
- Piles – shear bearing capacity of RC cross-section
- Piles – tube cross-section
- Chinese Standards – new settings and modifications
- Sheeting Check – option to calculate all stages at once
- All – improved data transfer from Walls into Slope Stability
- Reinforced Concrete – user defined input of extent of overhang without reinforcement
- All – input of contract and archive number in project description
- FEM – improved flow analysis
Visualization & Input improvements
- All – improved printout and export of figures
- All – improved input of 2D interfaces – automatic connecting of input elements
- All – colour distinction of status of stage analysis
- 3D drawing – improved drawing by smoothing
- 3D drawing – optimized zoom of entire structure both on screen and in printout
Engineering Manuals & Documentation
- Additional chapters of Engineering Manuals devoted to numerical modeling and analyses in the program GEO5 – FEM havebeen released.
- Any training materials can be explored or downloaded for free in the new section Documentation.
-
15 Oct 2013
GEO5 version 17
New features in version 17
- Micropile - new methods by Bustamante (SPT, Pressuremeter Ménard)
- Spread footing - Verification for uplift (tension)
- Sheeting check - determination of kh from pressuremeter test (Ménard)
- 2D programs - new feature Geoclipboard for work with layers
- FEM - Hypoplastic model
- FEM - export of GWT to Slope stability
- 2D programs - new input of pore pressures
- Terrain - import LandXML
- Slope stability - generation of polygonal slip surface from circular one
- MSE wall - internal stability check for slope without blocks
- Sheeting design - verification of external stability by Slope stability program
- MSE wall - new types of geotextiles
Standards
- LRFD 2012 for slope stability, retaining structures, spread footing
- Reinforced concrete - New Zealand code (NZS 3101-2006)
- Bulgarian National Annex to EN 1997
- Slope stability - Chinese method ITFM (Imbalance Thrust Force Method)
Further info about approaches implemented in the GEO5 programs.
Improvement of visualization
- New types of patterns (gINT, UCSC, Chinese)
- New visualization of patterns, full color patterns
- Pictures in text ouputs can take the whole page
- All programs - new icons and visualization
Localizations
- Vietnamese version and Vietnamese outputs
- Bulgarian outputs
View all available localizations.
Corrections
- Retaining structures - Useless input of total angle of friction
- Gabion - partial factor for strength of mesh according DA2 /EN 1997
- Walls - correction of uplift calculation for inclined footing bottom (GWT in front)
- Correction of Slovenian NA for piles - introduced model factor 1.3
- Correction of Spread footing check according GB - Pk, min.
- Terrrain - correction of runtime errors during analysis of volumes
Engineering manuals
- Part 2 - Piles, Pile CPT, Pile Group
- Part 3 - FEM
Download engineering manuals for free.
-
14 May 2013
GEO5 version 16
New features in version 16
- FEM - unsteady waterflow, mixed mesh, monitors and graphs
- Slope Stability, FEM - new DXF import, automatic import of structure
- Sheeting Check - failure by heave, failure by piping of soil
- Gabion, Prefab Wall - automatic search for the most utilised block dimensioning
- MSE Wall - extensible and inextensible reinforcement, new methods in internal stability check (AASHTO, FHWA, BS 9006, Chinese), check of joints
GEO5 French version
- French version and French outputs
- French NA for EN 1997-1 (EC 7)
Reinforced concrete
- verification of cross section in shear
- new standard EN 1992-2 (EC 2)
New PDF pictures in outputs
Further modifications and improvements
- Gravity Wall - new type of wall
- Sheeting Check - correction of analysis during unloading in front of structure
- Slope Stability - new import DXF, ability to move the structure to the origin
- Slope Stability - improvement of convergence for Spencer and Morgenstern methods
- Slope Stability - calculation of anchor length and forces in reinforcement for all methods
- MSE Wall - improvement of convergence for Spencer and Morgenstern methods
- FEM - new import DXF, ability to move the structure to the origin
- Walls - considering of vertical surcharge on soil wedge
- All programs - 'State' field in company information
- All programs - new category of Surcharge or Input forces - accidental
- All programs - faster and better visualization of pictures in outputs
Engineering manuals
- New training materials for engineers, students and teachers
- Explanation how to solve particular engineering problems in GEO5
- Available first 12 chapters about calculations of retaining walls, sheeting structures, slope stability, spread footings and consolidation
Download engineering manuals for free.
Corrected errors
- Spread footing - failure of program during settlement analysis (Oedometric modulus, no Deformation modulus input)
- Abutment - wrong earth wedge for special cross sections of Abutments
- Cantilever wall, Masonry wall - wrong depth of cross section of footing with base jump
- Pile group - correction of coefficient of pile group efficiency in cohesive soils
- Spread footing - correction of design procedure for EN 1997 and horizontal load
- Spread footing - correction of design procedure for factor of safety (ASD)
- FEM - correction of slope stability analysis for soils with highly different elastic modulii
- Walls - missing output of forces in footing bottom while bearing capacity is not checked
-
10 Dec 2012
GEO5 version 15
New program
Pile Group - Analysis of group of piles (raft foundations):
- analysis of a generally loaded pile group using the spring method (FEM)
- possibility to automatically calculate the spring stiffnesses from soil parameters
- analysis of vertical bearing capacity of the pile group in cohesionless soils (NAVFAC DM 7.2, Effective stress, CSN)
- analysis of vertical bearing capacity of the pile group in cohesive soils (earth block)
- analysis of settlement of the pile group in cohesive soils using a substitute foundation
- calculation of the linear load-settlement curve of the pile group in cohesionless soils
Major improvements
New system for input and administration of the analysis settings
common for all GEO5 programs :- analysis settings are unified in all GEO5 programs (except of FEM)
- considerably improved clarity and increased simplicity of GEO5 programs
- 35 pre-defined settings for various countries
- one click selection to switch between completely different settings as Safety factors or LRFD or Eurocode National Annexes (Slovakia, Poland, Germany, Austria…)
- possibility to create user-defined settings for particular analyses
- possibility to transfer user-defined settings among various users
View short tutorial how to use the new system for administration of analysis settings.
Further modifications and improvements
- MSE wall - possibility to assign a different soil to reinforced region
- Slope stability - improved optimization of both circular and polygonal slip surface
- Slope stability - automatic analysis of both combinations in case of verification according to EN 1997, DA 1
- Settlement - possibility to input concentrated loaded off the analysis axis
- Earth Pressures, Sheeting - introduction of the partial factor on Earth resistance according to DA2
- Rock Stability - verification according to EN 1997
- Masonry wall - verification of the influence of shear
- Piles - analysis adopting methodology according to CSN 73 1002 with general safety coefficients
- Sheeting Check - possibility not to reduce limit in case of analysis based on the method of depending pressures
- Micropile - possibility to choose standard for micropile dimensioning
- Walls - possibility to reduce parameters of the soil-footing analysis for limit states and factor of safety
- All programs - Polish national application document
- All programs - Limit states and Factor of safety contain defined design situations
Corrected errors
- Rock Slope - corrected input of surcharge for earth wedge
- Piles - analyses according to CSN and Masopust also in imperial units
- Piles - corrected output in case of verification according to factor of safety
- Rock Slope - incorrect reduction γmφ for limit states in case of plane slip surface
- MSE wall - water pressure acting on a structure is always horizontal
- Prefab Wall - corrected error of verification for non-typical shapes of walls with a forward overhang
-
14 Jun 2012
GEO5 version 14
General improvements
- Graphical printouts with table of soils
- Export of all topology in DXF format for 1D programs
- Safety factors and settings for Russia according to SNIPs
- Chinese language localization
- Settings for China, implementation of GB 50007-2002 standard
- Pre-defined slip surface when connecting to Slope stability, new defaults of connection settings
- Transfer of standard and coeficients settings during connections between programs
- New help system and helps
- National Annexes for Czech republic
- Reinforced concrete
- Russian standard SNIP 52-01-2003
- Chinese standard GB 50010-2002
- American ACI 318 standard 2011
- Limit strain method
- Concrete - possibility to compute other characteristics from strength in compression for own material
Further modifications and improvements
- FEM - Axisymetry
- FEM - Georeinforcement with infinitive strength, new helps and rocommendations
- FEM - Faster and more stable analysis of slope stability problem
- FEM - Improvement in black and white printouts of colored scale
- FEM - Visualization improvement of pore pressure outputs
- Earth Pressures, Walls - New way of computing eartquake effects for high slopes of terrain
- Cantilever Wall, Masonry Wall - Possibility to check stem of wall on active pressure (earthquake)
- Slope Stability - Possibility to combine total and effective soil properties in one analysis profile
- Slope Stability - New method according to Shahunyanc
- Gabion - New material defaults
- Prefab Wall, MSE Wall - Possibillity to define shear strength between blocks
- Sheeting Design - Simplification of input of friction between structure and soil
- Sheeting Check - Simplification of input of friction between structure and soil
- Sheeting Check - Output of earth pressures even when structure is not stable
- Spread Footing - Chinese standard GB 500072002
- Spread Footing - Russian standard SNIP 2.02.01-83
- Settlement - Improvement in black and white printouts of colored scale
- Plate - Improvement in black and white printouts of colored scale
- Plate - New boundary condition on line - internal hinge
- Plate - Copy of diagrams into clipboard
- Piles - Ratio of reinforcement according to EN 1992-1-1 chapter 9,8,5f
Corrections
- Waterflow - correction of analysis of Slope stability while water is above terrain
- Spread footing - correction of failure of program in bearing capacity for EC7 and too high skew of load
- Walls, Earth Pressures - wrong printout of coefficient Ka in first layer of soil and inclined terrain
- Settlement- fixed bug - analysis of consolidation with Edef
- MSE Wall - fixed bug in analysis according to EN 1997 - Design Approach 1
- MSE Wall - correction of connection between MSE Wall and Slope Stabilty with input elevation
- Spread footing -fixed analysing of bearing capacity on undrained subsoil and phi=0 (EN 1997)
- Cantilever wall - anchoring of wall is now possible for all type of walls
- Nailed Slopes - correction of internal stability analysis - safety factor / limit states
-
02 Nov 2011
GEO5 version 13
New program
MSE Wall – Mechanically Stabilized Earth Walls design
General improvements
- Modelling of water as a result of ground water flow analyses (FEM)
- Seismic design according to EN 1998, dynamic effect of water
- New method of determination of pull-out bearing capacity of nails
- Consolidation analysis of non-homogeneous layered soil
- New way of passing soil type and its parameters among programs
- Improved output reporting system:
- RTF export
- Compatibility with Office 2010
- Smart word wrap
- New explorer window
- Unicode (national symbols support)
Further modifications and improvements
- Spread Footing - Simplifications of calculations according to EN 1997, Design approach no. 1
- Piles - Simplifications of calculations according to EN 1997, Design approach no. 1
- Piles - Implementation of settlement limit for nonlinear load curve
- Terrain - New faster internal solver
- Terrain - DXF import in construction stages
- All wall programs - Possibility to choose vertical earth wedge
- All wall programs - Influence of earthquake on soil wedge
- All wall programs - Modification of earthquake influence on wall under water
- All wall programs - Dynamic water pressure in front of the structure
- All wall programs - Switch of geo-reinforcement to resisting forces
- Sheeting - Dynamic water pressure in front of the structure
- Cantilever Wall - Earthquake analysis for pressure at rest according to EN 1998
- Pile CPT - Partial factors revised according to EN 1997-2
- Sheeting Check - Reduction of subgrade reaction modulus below ditch bottom
- Sheeting Check - More detailed output of internal stability
- Slope Stability - Increase of normal stress due to anchors (Bishop, Fellenius)
Corrections
- Spread footing – load bearing capacity on rock subgrade according to EN – input of ɣQu partial factor
- Spread footing – limitation of max. Qu value by 10Mpa resp. 5MPa
- Spread footing – correction of tensioned spread footing dimensioning, floating point overflow
- All walls – incorrect print messages of earthquake intermediate results eliminated
- Spread footing – calculation modification of punching shear for unusual shapes of critical plane
- All walls – correction of incorrect numbering of layers for intermediate results printing
- Spread footing – elimination of unselected forces for eccentricity calculation of strip footing
- Pressures – change of calculation of influence of strip surcharge (pressure at rest)
- Nail – correction of nail stiffness export to Slope stability
- Slope stability – correction of calculation according to Sarma for vertical anchor
- Gabion design – correction of calculation of block weight under water
- Pile – printing of alpha partial factor for Tomlinson method corrected
- Slope stability – influence of inclined water level for Rapid draw down calculation added
-
01 Feb 2011
GEO5 version 12
New programs
- Plate - Foundation and roof plate analyses by the FEM
- Plate - The program performs the analysis of foundation and roof plates of any shape using the Finite Element Method.
General improvements
- New RTF exports for MS Word
- Slope stability - New analyses methods - Morgerstein, Janbu
- Slope stability - Output of slip surfaces computed during optimisation
- Settlement - Calculation of settlement depending on time (consolidation)
- Pile CPT - Revision of Eurocode, new 1997-2 implemented
- Pile CPT - New Schmertmann theory
- Spread Footing - New partial results - excentricity by load cases
- Piles - Correction of reinforce ratio for column
- Piles - Output of results off load cases
- Piles - Correction of outputs
- Sheeting Check, FEM - New databases of sheet piles
- All wall programs - Possibility to not consider pressure in the front
Eurocode EN 1997
- New defaults for EN 1997, new helps
- EN 1997 - Implementation of new National Annexes
Corrections
- All wall programs – print of partial factors on soil bearing capacity (LRFD and EN DA2)
- Micropile – correction of desription of materials (steel, concrete)
- Spread footings – self weight of construction is not considered in dimensioning
- Spread footings – consideration of uplift, when GWT is above terrain
- Piles - Matlock-Rees correction of determinantion of modulus of subgrade reaction
- Piles – print of type of construction for reinforcement ratio analysis
- Piles – correction of reinforcement ratio (column)
- Redi Rock Wall – change of partial factor for slip (soil – soil)
- All wall programs - correction of analysis of maximum eccentricity for LRFD and EN
- Spread footings – correction of analysis of horizontal bearing capacity on rock according to EN
-
22 Jul 2010
GEO5 Version 11
New programs
- Beam – analysis of beam on elastic foundation
- FEM - Water flow – module of program FEM for steady state seepage analysis
General improvements
- Slope stability - Modeling of rapid draw down
- Piles - New methods for the analysis of vertical bearing capacity (Tomlinson, NAVFAC, effective stresses) :
- Analysis of pile loaded in tension
- New methods for the determination of load settlement curve (Poulos)
- Methodology for verification analysis according to EN 1997 standard or based on classical approach (limit states, factor of safety)
- Terrain - Option to introduce interface using points
Eurocode EN 1997 (EC 7)
- Implementation of available National Annexes for EN 1997 (all programs).
- Selection of design situations corresponding with sets of partial factors (all programs).
- Implemented National Annexes: Slovakia, Austria, Germany, Hungary, Portugal, Finland, Greece, Netherland, Great Britain and Slovenia
Further modifications and improvements
- Nailed Slopes – option to perform verification analysis according to EN 199
- Abutment – option to perform verification analysis according to EN 1997
- Piles – option to perform verification analysis according to EN 1997
- Spread footing – analysis of punching shear based on final version of EN 1997
-
12 Nov 2009
GEO5 version 10
Implementation of automatic analyses according to Eurocodes EN 1997-1 and EN 1998-5
Analysis according to Eurocode have been fully completed in the following programs: Gravity Wall, Gabion Wall, Slope Stability, Spread Footing, Sheeting Design, Sheeting Check, Masonry Wall, Prefab Wall.
Innovations in FEM, Tunnel programs
Version 10 includes new material models – hardening and softening for Mohr-Coulomb and Drucker-Prager, CAP model for Drucker-Prager and generalised Cam-Clay model. We are currently preparing steady flow with a link to the slope stability analysis for version 11.
Plate programs
Beam and Plate programs allow input of action states according to EN 1990. The programs further comprise an automatic generator of load combinations according to EN 1990 including vast options for user modifications of the action states (selection and the main actions definition, definition of the loads acting together or the loads not acting together), that speeds up and simplifies the work with creation of combinations. The generator allows generation of standard and alternative combinations, further combinations for ultimate limit state and service-ability limit state analysis.
New Edition of the FIN EC software is released once a year, on November 15th. Users of the newest edition always have access to all new upgrades and updates of that edition. The edition is maintained for 2-3 years after release, even after a newer edition is introduced. Fine Maintenance subscribers always have access to new editions. Other users have the opportunity to buy the newest edition as a Single Upgrade.
-
19 Nov 2018
FIN EC 2019 - BIM Support, cost-effective Fine Maintenance and Packages
FIN EC 2019 News & Improvements
- BIM Support - Export to both IFC and LandXML formats in Fin 3D program
- Font selection in output reports
- Supported operating systems such as Windows 7, Windows 8.1, Windows 10, no longer support for Windows XP
Simply try our FIN EC Demo version for free without any analysis limitations.
Update your software
Fine Maintenance subscribers can download and installthe new Edition for free. Other customers can calculate the price of their Single Upgrade in our Shop – just sign into your account or contact us.
New Program Packages
We have introduced two new program packages - Basic Package for basic structural design of individual elements or details and the Fire Package for easy verification of fire resistance of steel, concrete and timber structures.
More cost-effective Fine Maintenance for Program Packages
- Professional Package - Annual Maintenance 440 €
- Basic Package - Annual Maintenance 220 €
- Concrete Package - Annual Maintenance 160 €
- Steel Package - Annual Maintenance 120 €
- Timber Package - Annual Maintenance 80 €
- Fire Package - Annual Maintenance 100 €
Do you use programs in an older version or without Fine Maintenance?
Contact us and switch to cost-effective packages with significantly lower maintenance costs and benefits i.e. when a new program is added to a package, maintained customers get that program for free.
Require Software for a Single Project? Try our Lease Plans
Do you need software for a once off specific project? Then take advantage of one of our lease plans. If you like the software, you can convert it to a perpetual license at a very favourable price. Check out our New Price List.
-
14 May 2018
FIN EC 2018 – Spring update
Spring update brings following improvements in our programs:
Verification programs
- adjustable width of tree menu
- drag and drop operations with tasks in tree menu
- selection of tasks in tree menu supports keys Shift (range) and Ctrl (add into selection)
- new shortcuts for tree menu: Ctrl+A (select all), Ctrl+I (inverted selection), Del (delete)
Fin 2D, Fin 3D
- tool for an export of reactions (compatible with Geo5 programs)
Concrete, Concrete Fire
- import of projects from the program “Concrete Beam”
Concrete Beam
- shift of moment line due to shear effect
- tools for changing the order of longitudinal reinforcement
Steel
- import of projects from the program “Steel Fire”
Steel Fire
- import of projects from the program “Steel”
- verification of standard design combinations for ULS
Timber
- import of projects from the program “Timber Fire”
Timber Fire
- import of projects from the program “Timber”
- verification of standard design combinations for ULS
Loading
- improvements of user interface
Simply try our Demo version for free.
Fine Maintenance subscribers and FIN EC 2018 users can download and install the Spring Update for free. Other users can calculate the price of the Single Upgrade in our Shop - just log into your account.
-
27 Nov 2017
FIN EC 2018 Released
The new Edition features number of changes and improvements:
General improvements
- Improved appearance
- Editable font size in documents
- Import of projects using XML format
Fin 2D, Fin 3D
- Members with variable cross-sections (haunches)
- Alignment of members on screen
- Easier selection of existing cross-sections and materials
Verification programs
- Import of forces from clipboard
- New window for import of forces
- Haunches for task types “Member” and “Beam”
- Input of cross-section in segments
Punching
- Punching of foundations
Loading
- Wind load for vertical walls in two directions
- Consideration of the lack of correlation of wind pressures for walls
Try the Demo version for free.
Upgrade to FIN EC 2018
Fine Maintenance subscribers can download and install the new Edition for free. Other users can calculate the price of the Single Upgrade in our Shop - just log into your account.
Fine Maintenance
Subscribe to the Fine Maintenance program and get all upgrades, including new Editions for free. Fine Maintenance subscribers will be offered a special 10% discount on new software or license purchases
-
15 Nov 2016
FIN EC 2017
FIN EC 2017 features many changes and improvements :
General improvements
- New window for document printing
- Autosave option in all programs
- High resolution screen support (UHD, 4K)
Steel, Steel Fire, Timber, Timber Fire
- New function 'Beam' for comprehensive analysis of horizontal beams with specified loads.
Fin 2D, Fin 3D
- Utilization displayed for all members of the structure
- Merged windows with drawing settings
- Workspace show changes in drawing settings
- National annexes for Austria, Slovenia and Bulgaria
- Improved manipulation tools (move, copy, mirror)
- Extraction of a member from a design group
- Extended options of inputting loads
Programs for RC structure analysis
- Support of new standards CSN EN 1992-1-1 Z3 and STN EN 1992-1-1 A1/NA
Concrete Beam
- Improved brief analysis report
Concrete, Concrete Fire
- Improved analysis speed
Punching
- New details 'Wall end' and 'Wall corner'
- General procedure for factor β calculation
- User-defined value of factor kmax
Loading
- National annexes for Austria, Slovenia and Bulgaria
Simply try our Demo version for free.
Upgrade to FIN EC 2017
Fine Maintenance subscribers can download and install the new Edition for free. Other users can calculate the price of the Single Upgrade in our Shop - just log into your account.
Get a significant discount on Single Upgrade – offer is available till 31.12.2016
Fine Maintenance
Subscribe to the Fine Maintenance program and get all upgrades, including new Editions for free. Fine Maintenance subscribers will be offered a special 10% discount on new software or license purchases.
-
04 Apr 2016
FIN EC version 5 - Spring Update
New update of FIN EC software brings following new features in programs Fin 2D and Fin 3D:
Simplified tree menu
- The new tree menu improves the orientation in the software and speeds up the input of structures. Main changes are:
- Unification of tree menus for preprocessor and postprocessor
- New modes “Edit” and “Remove” work both for joints and members
- New mode “Tools” with tools for modifications of structures
Improved selection of elements
- Updated version uses selection methods common in CAD applications.
- Dragging from left to right selects objects that are entirely enclosed in rectangle, dragging from right to left selects objects that are crossed by rectangle
- Shortcuts “Ctrl”+”A” for the selection of all objects and key “Esc” for cancellation of a selection
- Easier selection in tables using keys “Shift” and “Ctrl”
Context menus in the workspace
- Context menus for elements in the workspace and tables were added. These context menus contain the most common functions and tools. Context menu can be opened using right mouse click. Context menus also contain:
- The most common features located in the tree menu (e.g. Edit, Remove)
- Tools for batch edit (Copy properties, Modify supports)
- Tools for the work with loads
Graphical input of members in Fin 3D
- Members can be now specified by a length and direction. Also snap points and snapping to significant directions can be used during input of structures.
Existing users of FIN EC version 5 and Fine Maintenance subscribers can download and install the latest improvements for free. Other users can calculate the price of their Single Upgrade in our Shop – just sign into your account or contact us.
-
24 Nov 2015
FIN EC improvements in version 5
News and improvements
- Fin 2D and Fin 3D: Pictures in text documents
- Concrete: 3D interaction diagram
- Punching: Column heads
- Concrete Beam: Simple report
- Steel: general built-up cross-section with 4 L-profiles
- Steel connections: details with fin plates
- Loading: Wind load for canopy roofs
- New appearance of programs
- Read-only mode
Enhanced list of improvements
Pictures in documentation
Figures can be added into text documentation in programs Fin 2D and Fin 3D. These figures are constantly updated and show already the latest results.3D interaction diagram
The program Concrete contains 3D interaction diagram for cross-sections. It shows both 3D view and significant planar cuts.Column heads
The details of column-slab connection in the program Punching may be reinforced by column heads. Several types are available (step, oblique, general shape).Detail with fin plates in Steel Connections
Connection of beam to column or girder with the help of fin plate.Wind load on canopy roofs
The program Loading creates the loading reports for wind on canopy roofs.Other features:
- Concrete – choice of reinforcement ductility class
- Steel: general built-up cross-section with 4 L-profiles
- New appearance of programs
- Read-only mode
Contextual Help
Contextual Help FIN EC has been released in English. It contains detailed explanations of the methods used in our software and is accessible in any of our FIN EC programs by pressing the F1 key. Alternatively visit the Online Help.
Existing users of FIN EC version 5 and Fine Maintenance subscribers can download and install the latest improvements for free. Other users can calculate the price of their Single Upgrade in our Shop – just sign into your account or contact us.
-
31 Oct 2014
FIN EC version 4
New program
-
Concrete Fire
- fire resistance of RC members according to EN 1992-1-2
- determination of temperature in concrete and reinforcement bars
- general combination of actions (normal and shear forces, bending and torsional moments)
- nominal and parametric fire exposure curves
- basic and accidental loads, import of loads from file
- analysis according to 500°C isotherm method or Zone method
- import of projects created in programs Concrete 2D and Concrete 3D
New features
- all dimensioning programs – covering page for graphical documents
- Fin 2D, Fin 3D – members with excluded tension or compression
- Fin 2D, Fin 3D – deformation in all points of structure
- Fin 2D, Fin 3D – auto save option
- Fin 2D, Fin 3D – copy of load case including loads
- Fin 3D – input of loads in the local coordinate system of the cross-section
- Concrete Beam – spring supports, internal hinges, analysis nodes
- Concrete Beam – tapers
- Concrete 2D, Concrete 3D – input of effective modulus of elasticity for stress verification
- Concrete 2D, Concrete 3D – stress and deformation diagrams
- Loading – envelope of wind loads on roof
- Loading – localization based on force (calculation of anchors)
- Steel – manual input of buckling curve
- Steel – plastic analysis of general cross-sections created in program Section
- Steel – sketch of effective cross-section for class 4
- Timber – wood-based materials
- Timber Fire – analysis of built-up cross-sections
- Steel Joints, Steel Base – export of DXF file
- Steel joints – bottom haunch without flange
- Masonry – new verification of pillars and walls
- Masonry – new load template – pillar/wall
- Masonry – effective thickness of wall
- Section – import of DXF file
-
Concrete Fire
-
12 Nov 2013
FIN EC version 3 improvements
New program
- Corbel
- check of RC corbel using the strut-and-tie models
- directly and indirectly supported corbels
- determination of maximal stress in concrete
- verification of main tensile reinforcement and stirrups
- input of main tensile reinforcement in two layers
- large selection of the most common shapes of corbels
Improvements in version 3
- FIN 2D, FIN 3D
- service class for timber structures according to EN 1995-1-1
- combinations for final deflections according to EN 1995-1-1
- faster data loading and saving to disc
- enhanced algorithms for optimization of joint numbering
- contextual help for programs
General improvements
- national annexes for Poland
- output language: German
- basic User Guide in English
Any Maintenance subscriber or user of FIN EC version 3 can install the improvements for free. Other users can obtain the latest version by purchasing Single Upgrade.
- Corbel
-
20 Jun 2013
FIN EC version 3
General improvements
- updated appearance of programs
- national annexes for Slovakia
- adjustable text size for workspace
- text size adapts to the workspace zoom
- mass input is available also for standalone design programs
- print of active workspace in design programs
- batch printing of graphic documents for members
Further modifications and improvements
- FIN 2D, FIN 3D
- scissor joints
- load combinations in outputs are divided into combinations for ultimate and serviceability limit states
- enhanced tables of load cases
- Concrete 2D, Concrete 3D, Concrete Beam
- new dialog box for shear and torsion reinforcement
- single legged stirrups
- input of single bent-up bar (not row)
- accidental design situations
- Concrete 3D
- design of general cross-section created in program Section
- FIN 2D
- CAD-like input of topology
- Steel
- design of general cross-section created in program Section
-
13 Nov 2012
FIN EC version 2
General improvements
- easy selection of design standard and input of partial factors
- generating back-up copies of projects in format *.backup
- import of internal forces from files in format *.txt or *.csv into designing programs
- possibility to change order of projects in the tree
- printing of detailed partial results in programs Steel, Steel Fire, Timber and Timber Fire
- improved automatically generated labels of cross-sections including dimensions
- Slovak and English outputs for all programs
Further modifications and improvements
- FIN 2D, FIN 3D
- selection of a general standard for compiling combinations
- envelopes of reactions
- possibility to optimize numbering of members for computation
- more items in the input tree may be open at once
- simplified input of special properties of members
- FIN 2D allows measuring of distance (it is located in Tools)
- Concrete 2D, Concrete 3D
- arbitrary number of reinforcement rows
- input of reinforcement by defining distance between bars
- number of bars may be determined as decimal number
- member type 'Wall'
- import of general cross-section topology including reinforcement from file in format *.dxf (available only in Concrete 3D)
- Concrete Beam
- automatically computed factor of load duration for generated combinations
- Masonry
- possibility to run computation according to Eurocode without national annex
- Loading
- database of imposed loads and self-weight of stored materials according to EN 1991-1-1
- updated database of building materials
- user-defined catalogue of building materials directly connected with the default catalogue
- snow load according to STN EN 1991-1-3/NA1 valid from March 1st, 2012
- Steel, Steel Fire
- verification of anti-corrosive steel according to EN 1993-1-4
- possibility to set 'cold formed' for arbitrary cross-section
- cross-section composed from hot rolled I-profiles allows to input number of profiles in cross-section
- Timber Fire
- fire detail 'Wall column, exposed from both sides'
- fire detail 'Wall column, exposed for one side'
All licenced users can download and install the latest version for free.
-
06 May 2019
TRUSS4 version 14
TRUSS4 v14 comes with the following improvements:
General improvements:
- Active workspace with context menus
- New graphic selections
- Object snap tracing
- Modified user interface (new toolbars, optimized tree menu)
- Merged windows with project settings
- Support for saw machines Randek and Hundegger P8,P10
Main improvements in Truss 3D:
- New 3D engine
- Automatic search for identical trusses
- Editable position of short mono trusses in hip
- New tool for easy input of splices
- Export IFC
Main improvements in Truss 2D:
- New toolbar “Tools”
- Stubbed truss with cantilever
- Joint on bottom chord with extended web
- Editable number of plates in wedge
- Option to switch off auxiliary plates
Find further information about TRUSS4 version 14.
-
28 Nov 2018
TRUSS4 version 13
The Truss4 version 13 was released. This version fixes installation problems on Windows XP/Vista and improves performance on ultra-high resolution screens. This is the last version which can be installed on Windows XP/Vista. The version 14 will support only operating systems Windows 7, 8.1 and 10.
-
05 Apr 2018
TRUSS4 version 12
TRUSS4 v12 comes with the following improvements :
- Roof surfaces for general polygon
- Switching off load transfer for particular load cases
- Division of attic trusses
- Load transfer from trusses to beams
- Truss generator in tree menu of Truss 2D
- Changes in files for DePauw saw
- German version
Find further information about TRUSS4 version 12 or try the new Demo version for yourself.
-
30 Oct 2017
TRUSS4 version 11
TRUSS4 v11 comes with the following improvements :
- Support of high resolution screens
- Extended options in load generator
- Changes in overhanging snow
- Changes in load combinations
- Structural layout according to NF DTU 31.3
- Export of arched members into *.bvn and *btl files
- Measuring distances in 3D workspace
- New options for attic trusses
Find further information about TRUSS4 version 11 or try the new Demo version for yourself.
-
14 Dec 2016
TRUSS4 version 10
TRUSS4 v10 comes with the following improvements :
- End cuts can be created in the software Truss 3D
- Extended options fir manufacturing documentation and saw exports
- Extended table in “Truss check”
- Choice of detail in step down hip
- New printing options
- National annex for Austria
Find further information about TRUSS4 version 10 or try the new Demo version for yourself.
-
02 Dec 2015
TRUSS4 version 9
Truss v9 comes with the following improvements :
- Load input in Truss 3D
- Shift of edge verticals
- Material Kerto-S
- Keyboard shortcuts
- Improved export for Hundegger saw machine
Find further information about TRUSS version 9 or try the new Demo version for yourself.
-
22 Oct 2015
TRUSS4 version 8
Truss v8 comes with the following improvements:
- Loading for canopy roofs
- Tool for removing all construction lines
- Envelopes for inner forces and moments
- Maximum and minimum values of forces and moments on members
- New appearance of iconsTruss 2D
- Load generator
- Improvements in dimensioning
- Improved analysis of deflection between joints
- New keyboard shortcutsTruss 3D
- Display of analysis results
- Mono-pitched roof attachment
- Extended function of hip roof detail
- New keyboard shortcuts
Find further information about TRUSS version 8 or try the new Demo version for yourself. -
22 Oct 2015
TRUSS4 version 7
Truss v7 comes with the following improvements:
- Improved input of multi-ply girders
- Measuring with snap points
- New truss layout
Truss 2D- Graphical input of joints
- Option to switch off loading width multiplier for point loads
- Improved analysis scheme of chords with variable depths
- Snap points in positions of point loads
Truss 3D- Autobackup
- Improved snap points
- Graphical input of points
- New sorting of trusses
- Display of timber dimensions in Truss 3DFind further information about TRUSS version 7.
-
22 Oct 2015
TRUSS4 version 6
Truss v6 comes with the following improvements:
Graphical input of walls, trusses and members
- direct input in 2D workspace without using dialog boxes
- input of walls without points
Construction lines
- auxiliary lines that may be used as snap points for input of walls, trusses and membersExtended options of hip
- option for hips in hipFind further information about TRUSS version 6.
-
24 Feb 2014
TRUSS4 verze 6
Pro uživatele systému TRUSS4 je připravena ke stažení aktualizace 6.0.
Některá vylepšení ve verzi 6.:
- Grafické zadávání zdí, vazníků a dílců
- Rovinné (2D) pracovní plochy nyní umožňují přímé zadávání prvků graficky bez nutnosti práce s dialogovými okny.
- Zdi mohou být nově do konstrukce zadávat též přímo graficky na 2D pracovní ploše bez nutnosti vkládání bodů.
- Obdobně jako zdi lze zdávat i vazníky. - Konstrukční linie
- Konstrukční linie jsou pomocné čáry, které lze využít při modelování konstrukce. - Rozšíření možností valby
- Základní valba byla rozšířena o možnost vytvoření částečných valeb v rozích.
Více informací naleznete v PDF souboru:Podrobný seznam změn - TRUSS4 v6
- Grafické zadávání zdí, vazníků a dílců